9. Guarantee
The chlorinator is guaranteed
years for parts and manpower. This guarantee
covers all defects recorded during this period that
are not imputed to improper use by the user. The
manufacturer is sole judge of what must be done
to remedy the reported claim.
We would in no way be responsible for maintaining
the pool water during the time it might take to
repair the machine (addition of chemical products,
etc.).
If need be, the user must accept a verification of
user's installation by our after-
carry out all tests necessary to prove the existenc
of the reported defect.
Electrode : 2-year guarantee
This guarantee does not cover failures resulting
from: negligence, misuse, non
installation, modification,
maintenance or winteri
zation not done or poorly
done, malicious intent, flood
damage due to dropping or impacts.
Any back/forth shipping of material for overhaul or
repair will be done, postage-
Without prior notification the manufacturer
reserves the right to modify the form, design or
aspect of its products. With regards to the user,
this guarantee does not hinder the application of
legal guarantees covering hidden defects such as
those defined in Articles1641 and
French civil cod
e of law. Neither does it exon
from the legal conformity guarantee established in
the French consumer code of law, ordinance
2005136 of Feb. 17, 2005.
Installation and user
years for parts and manpower. This guarantee
covers all defects recorded during this period that
are not imputed to improper use by the user. The
manufacturer is sole judge of what must be done
We would in no way be responsible for maintaining
the pool water during the time it might take to
repair the machine (addition of chemical products,
If need be, the user must accept a verification of
carry out all tests necessary to prove the existence
.
This guarantee does not cover failures resulting
from: negligence, misuse, non
-compliant
on,
zation not done or poorly
-
Any back/forth shipping of material for overhaul or
Without prior notification the manufacturer
reserves the right to modify the form, design or
aspect of its products. With regards to the user,
this guarantee does not hinder the application of
legal guarantees covering hidden defects such as
others of the
e of law. Neither does it exon
erate
from the legal conformity guarantee established in
the French consumer code of law, ordinance
10.
What to do in case of problem
Any electrical manipulations
done by a qualified electrician. Only
full-
fledged professionals are
authorized to open the machine.
The chlorinator stays off
Check the connection on the filtration box.
The light
2" are off:
The machine is in safety mode: electrode current,
voltage or internal temperature are too high. The
system will move automatically into prod 1 and
prod 2 once these safety items are OK.
The machine does not reach the electric
current set-point:
Check:
1-
The salt concentration (> 3.5 g/l),
2-
The water temperature (> 15°C),
3-
The condition of the electrode: it must be clean
and scale-
free. If the problem persists, this means
that your electrode is wearing out and needs to be
replaced.
Low chlorination in spite of the proper running
of the chlorinator:
1-
Check the pH (between 6.9 and
stabilizer concentration (between 20 and 50 g/m3),
2-
Increase the electric current for production,
3-
Increase the filtration time.
No c
hlorine although the chlorinator is
running:
1-
Presence of hydrogen peroxide: This product
cancels the chlorine reading for approximately 3
weeks,
2-
Saturated or imbalanced water: carry out shock
chlorination, re-
balance the TA (12 to 18° F) and, if
nece
ssary, replenish part of the pool water.
17
ENGLISH
What to do in case of problem
?
Any electrical manipulations
must be
done by a qualified electrician. Only
fledged professionals are
authorized to open the machine.
The chlorinator stays off
:
Check the connection on the filtration box.
d 1" and "prod
The machine is in safety mode: electrode current,
voltage or internal temperature are too high. The
system will move automatically into prod 1 and
prod 2 once these safety items are OK.
The machine does not reach the electric
The salt concentration (> 3.5 g/l),
The water temperature (> 15°C),
The condition of the electrode: it must be clean
free. If the problem persists, this means
that your electrode is wearing out and needs to be
Low chlorination in spite of the proper running
Check the pH (between 6.9 and
7.4) and the
stabilizer concentration (between 20 and 50 g/m3),
Increase the electric current for production,
Increase the filtration time.
hlorine although the chlorinator is
Presence of hydrogen peroxide: This product
cancels the chlorine reading for approximately 3
Saturated or imbalanced water: carry out shock
balance the TA (12 to 18° F) and, if
ssary, replenish part of the pool water.
To Next Page
Loading...
