GREAT PLANES Performance Reactor - User Manual

INSTRUCTION MANUAL
Wingspan: 84.5 in [2140mm]
Wing Area: 1556 in
2
[100.4dm
2
]
Weight: 14 – 17 lb [6350 – 7710g]
Wing Loading: 21 – 25 oz/ft
2
[63 – 77g/dm
2
]
Length: 85 in [2160mm]
Radio: 5-channel minimum computer radio with mixing
functions, eight servos
Motor/Engine: 1.60 – 2.10 cu in [26 – 34cc] two-stroke,
2.00 – 2.20 cu in [33 – 36cc] four-stroke,
2.5 – 3.0 cu in [43 –50cc] gas
RimFire
™
80-75-230 out-runner brushless motor
Great Planes
®
Model Manufacturing Co. guarantees this kit to be
free from defects in both material and workmanship at the date
of purchase. This warranty does not cover any component parts
damaged by use or modifi cation. In no case shall Great Planes’
liability exceed the original cost of the purchased kit. Further,
Great Planes reserves the right to change or modify this warranty
without notice.
In that Great Planes has no control over the fi nal assembly or
material used for fi nal assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of
the fi nal user-assembled product. By the act of using the user-
assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the place
of purchase.
To make a warranty claim send the defective part or item to Hobby
Services at the address below:
Hobby Services
3002 N. Apollo Dr., Suite 1
Champaign, IL 61822 USA
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone number,
fax number, e-mail address), a detailed description of the problem
and a photocopy of the purchase receipt. Upon receipt of the
package the problem will be evaluated as quickly as possible.
READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
Champaign, Illinois
(217) 398-8970, Ext 5
airsupport@greatplanes.com
Entire Contents © Copyright 2008 GPMA1420MNL V1.0
WARRANTY

Summary

Introduction and Safety

WARRANTY

Manufacturer's warranty terms and conditions, liability limitations.

IMPORTANT SAFETY PRECAUTIONS

Critical warnings and guidelines for safe assembly and operation.

Model Configuration and Preparation

DECISIONS YOU MUST MAKE

Key choices regarding engine type and required components.

Gas Engine Option & Required Parts

Lists components needed for the gasoline engine setup.

Electric Motor Option & Required Parts

Lists components needed for the electric motor setup.

ADDITIONAL ITEMS REQUIRED

Lists necessary adhesives, building supplies, and tools.

KIT INSPECTION

Procedure to verify all kit parts are present and in good condition.

Wing and Fuselage Assembly

BUILD THE WINGS

Instructions for assembling the aircraft's wings.

Hinge the Ailerons

Detailed steps for hinging the aileron control surfaces.

Install the Aileron Servos

Mounting and connecting servos for the ailerons.

BUILD THE FUSELAGE

Instructions for assembling the aircraft's fuselage.

Main Landing Gear Installation

Steps for attaching the main landing gear components.

Install the Horizontal Stabilizer

Mounting the horizontal stabilizer to the fuselage.

Tail Assembly and Component Installation

Hinge the Horizontal Stabilizer

Process for hinging the horizontal stabilizer's elevators.

Hinge the Rudder

Process for hinging the rudder control surface.

Install the Elevator & Rudder Servos

Mounting and connecting servos for elevators and rudder.

Tail Gear Installation

Steps for installing the tailwheel assembly.

Engine and Radio System Installation

ENGINE;MOTOR INSTALLATION

Procedures for installing the aircraft engine or motor.

Gas Engine Installation

Detailed steps for installing the gasoline engine.

Electric Brushless Motor Installation

Detailed steps for installing the electric motor.

RADIO INSTALLATION

Guide for installing the radio system components.

Radio System Installation - Gas Engine

Installing the radio system for a gas engine setup.

Final Assembly and Pre-Flight Checks

FINAL ASSEMBLY

Steps to complete the model assembly.

Cowl & Prop Installation

Attaching the engine cowl and propeller.

Wing Installation

Securing the wings to the fuselage.

GET THE MODEL READY TO FLY

Final checks and setup before the first flight.

Check the Control Directions

Verifying control surface response and centering.

Balance Your Model (C.G.)

Determining and setting the correct center of gravity.

Flight Operations and Safety

Charge Your Radio Batteries

Instructions for charging radio system batteries.

ENGINE & MOTOR SAFETY PRECAUTIONS

Safety guidelines specific to engines and motors.

FLYING

Guidance on operating the model aircraft.

Takeoff

Procedures for initiating and performing a takeoff.

Landing

Procedures for performing safe landings.

GREAT PLANES Performance Reactor Specifications

General

Brand	GREAT PLANES
Model	Performance Reactor
Category	Toy
Language	English