GREAT PLANES EDGE 540 T Performance Series

To Next Page

INSTRUCTION MANUAL

Wingspan: 49.5 in [1260mm]

Wing Area: 490 in

[31.6dm

]

Weight: 3.25 – 3.5 lb [1470 – 1590g]

Wing Loading: 15.0 – 16.0 oz/ft

[46 – 49g/dm

]

Length: 48 in [1220mm]

Radio: 4-channel minimum, 5-channel computer radio with

mixing capabilities (for separate ailerons)

Motor: RimFire

™

42-50-800 out-runner

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT INSTRUCTIONS

AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

Champaign, Illinois

(217) 398-8970, Ext 5

airsupport@greatplanes.com

Great Planes

Model Manufacturing Co. guarantees this kit to be

free from defects in both material and workmanship at the date

of purchase. This warranty does not cover any component parts

damaged by use or modiﬁ cation. In no case shall Great Planes’

liability exceed the original cost of the purchased kit. Further,

Great Planes reserves the right to change or modify this warranty

without notice.

In that Great Planes has no control over the ﬁ nal assembly or

material used for ﬁ nal assembly, no liability shall be assumed nor

accepted for any damage resulting from the use by the user of

the ﬁ nal user-assembled product. By the act of using the user-

assembled product, the user accepts all resulting liability.

If the buyer is not prepared to accept the liability associated

with the use of this product, the buyer is advised to return this

kit immediately in new and unused condition to the place of

purchase.

To make a warranty claim send the defective part or item to Hobby

Services at the address below:

Hobby Services

3002 N. Apollo Dr., Suite 1

Champaign, IL 61822 USA

Include a letter stating your name, return shipping address, as

much contact information as possible (daytime telephone number,

fax number, e-mail address), a detailed description of the problem

and a photocopy of the purchase receipt. Upon receipt of the

package the problem will be evaluated as quickly as possible.

WARRANTY

Main Page

Need help?

Do you have a question about the GREAT PLANES EDGE 540 T Performance Series and is the answer not in the manual?

Summary

Introduction, Safety, and Pre-Assembly

Warranty and Company Information

Details the product warranty, contact information, and company specifics.

Introduction and Safety Guidelines

Provides model overview, AMA affiliation, and critical safety rules for operation.

Component Selection and Required Items

Guides users on making key decisions and lists all necessary parts and tools.

Kit Inspection and Parts Ordering

Explains procedures for ordering replacement parts and inspecting kit contents.

Assembly and Installation Procedures

Wing Assembly

Step-by-step instructions for assembling the wings and installing aileron servos.

Fuselage and Landing Gear Installation

Instructions for attaching landing gear, tail gear, and the horizontal stabilizer.

Control System and Motor Installation

Guides the installation of elevators, motor, radio system, and control linkages.

Decal Application

Covers applying decals to the model for a finished appearance.

Pre-Flight Setup and Checks

Model Finishing and Center of Gravity (C.G.)

Procedures for finishing the model, including cowl, canopy, and critical C.G. balancing.

Lateral Balance and Propeller Balancing

Instructions for achieving lateral balance and balancing propellers to prevent vibration.

Pre-Flight Procedures and Radio Checks

Essential checks like identifying model, charging batteries, and range checking radio.

Safety Codes and Final Checklist

Reviews AMA safety codes and provides a final checklist for verification before flight.

Flying Techniques and Maneuvers

Basic Flight Operations

Covers takeoff, general flight handling, and landing procedures for the model.

Advanced and 3 D Flying Techniques

Explains 3D flying techniques, including specific maneuvers like waterfalls and hovers.

Aerobatic Maneuver Guide

Detailed instructions for performing advanced aerobatic maneuvers like spins and rolls.