GRECELL 2001A - Page 10

ю Fault Resolution
Status Explanation Recover method
e
Above icons flash
Output exceeds
the standard
1. Remove the output device.
2. Check whether the overload
protector is activated. If it is
activated, press the overload
protection button, press the
АС output button.
and buzzes.
(short circuit). 3. If the overload protector does
апа buzz. not spring up, directly press
AC output to restore the
output function.
H
The temperature Remove the equipment, turn off
#L of this product the power of this product, and
has exceeded the wait for the equipment to reach
The temperature N В
Р appropriate the appropriate temperature.
warning icon flashes temperature.
Bad wire connection.
Confirm the connection status
of the line and the power supply
status.
@
Charging unavailable.
Overload protection
function activated.
1. Turn off the power button and
remove cables from all ports.
2. After verifying that all components
are normal, turn on the power
button.
3. Press the overload protection
button Ю connect the АС cable
to recover AC input.