How to fix vibration noises at high speeds in Grech Motors G28?
If you experience noises or vibrations at high speeds, it may be due to a damaged or out-of-balance drive line. Contact a qualified drive line shop to properly balance the multiple drive line extensions used in your bus. GRECH MOTORS can recommend one near you.
What to do if exterior sealants are cracking on Grech Motors Other?
If the exterior seams of the bus crack or start lifting, clean the area with rubbing alcohol or mineral spirits. Remove the old silicone with a sharp knife or razor cutter. Clean the area again, then apply a thin bead of exterior silicone and smooth it with your finger for a smooth appearance.
Why is the rear electric step inoperative on my Grech Motors G28?
First, check if the step switch is turned on; it's located inside the cargo area on the right-hand sidewall. If it still doesn't power up, check the fuse in the electrical panel behind the driver's seat. The rear step should be lubricated every 30 days to ensure proper operation.
What to do if the rear A/C blower is inoperative in Grech Motors G28?
Check to make sure all fuses are good. If the rear A/C is still not working, call the Service Department at GRECH MOTORS.
How to troubleshoot an inoperative rear stereo/CD in Grech Motors G28?
Check to make sure all connections are tight. Also remove the stereo and check the fuse located on the backside of the stereo. Also check the fuses in the OEM fuse panel for Radio.
Why are the passenger lights inoperative in my Grech Motors G28?
Check to make sure the switch on the overhead control panel is turned on. There is a 5 minute light timer for the interior lights which will automatically turn them off when the door is open. The ignition switch needs to be turned on for at least 10 seconds to reset the timer.
What causes the back-up alarm to be inoperative on a Grech Motors Other?
Check to make sure reverse lights are coming on, if not, check the fuse located in the FORD fuse panels.
What to do if the side entry door ajar alarm is triggered on Grech Motors G28?
Check to make sure the side door lock is engaged properly.
How do I fix an inoperative paging system in Grech Motors G28 Other?
Check the 5 amp fuse on the circuit board behind the driver. Wiring schematics and instructions for the paging system are located in this manual on page 22.
Daily checks to ensure the vehicle is safe and operational before starting.
Important warnings and precautions for safe operation and passenger safety.
Procedures for operating emergency exits like doors and windows for safe egress.
Overview of driver's overhead and dash control panels for vehicle functions.
Operating the PROAIR climate control, audio, video, and navigation systems.
Managing DEF, water, and operating the suspension system.
Information on tire grading, specifications, inflation, and safety.
Guidance on proper vehicle loading, weight ratings, and payload calculations.
Recommended service intervals and checks for maintaining vehicle systems.
Common problems and suggested solutions for vehicle operation issues.
Information on obtaining parts, service procedures, and warranty policies.
General| Brand | Grech Motors |
|---|---|
| Model | G28 |
| Category | Other |
| Language | English |
To Next Page