button before connecting or disconnecting external power
sources.
HINT: ! A PC or laptop computer equipped with a USB connector can also be
! used to charge the PSR-800.
NOTE: ! Some external USB power supplies or computers may generate RF
! noise that can interfere with the PSR-800ʼs reception. If interference
! occurs, try disconnecting the PSR-800 from the external power
! source and move the radio away from the PC.
To access the USB connector, use your fingernail or a miniature
screwdriver to open the USB connector cover at the bottom of
the cover as shown in Figure 8. To close the cover, press it down
against the housing until it snaps into place.
PSR-800 User Manual! Page 27
To Next Page
Loading...
