To protect your hearing, follow these guidelines when you use
headphones.
•
Prior to wearing the headphones, insert the headphone plug
into the HEADPHONE jack and set the volume to zero. With
the headphones on, adjust the volume to a comfortable level.
•
Avoid increasing the volume once you set it. Over time, your
sensitivity to a volume level decreases, so volume levels that
do not cause discomfort might damage your hearing.
•
Avoid or limit listening at high volume levels. Prolonged
exposure to high volume levels can cause permanent hearing
loss.
Traffic Safety
Wearing headphones while operating a motor vehicle or riding a
bicycle is very dangerous and illegal. Do not operate any vehicle
while listening to the PSR-800 with headphones or earphones.
Connecting an External Speaker
In a noisy area, an amplified speaker (not supplied) might
provide more comfortable listening. Plug the speaker cableʼs 1/8-
inch (3.5 mm) mini-plug into the PSR-800ʼs HEADPHONE jack.
Browsing the Library, Picking Objects and Importing to Scanlists
Overview
Programming the PSR-800 consists of three basic steps, and
youʼll follow these steps each time you want to transfer new
objects from the Library to the PSR-800ʼs Scanlists. The three
steps are as follows:
Browse the Library
Much like a real library, youʼll browse the PSR-800ʼs Library to
find objects that you want to monitor. The PSR-800ʼs Library is
organized primarily by US States or Canadian Provinces, then by
Agencies, Counties/Independent Cities or Systems. You can
keep your scannerʼs Library current by using the Check for
Library Update option in the PSR-800 PC application.
PSR-800 User Manual! Page 32
To Next Page
Loading...