―９―
2. Removal of Stock Parts
When removing the stock parts, make sure you read over the factory
repair manual for the proper procedures
.
2-1 Disconnect the battery. Write down the radio presets and be sure to have the code
for the factory radio.
2-2 Relieve the fuel pressure in the fuel system. (see factory repair manual for detail
procedure).
2-3 Drain the engine oil.
2-4 Remove the Air cleaner assembly with intake tube, and breather hose.
2-5 Remove the exhaust manifold and heat shields.
2-6 Remove the two engine under covers and the front bumper.
To Next Page
Loading...
