Why does Gree Heat Pump show compressor synchronism error?
A compressor synchronism error in your Gree Heat Pump could be due to high pressure, low voltage, or bad connections. Check the system's pressure levels, ensure the voltage is adequate, and inspect the connections.
What to do if Gree Heat Pump has a 4-way valve malfunction?
If your Gree Heat Pump is experiencing a 4-way valve malfunction, it could be due to a bad connection, solenoid failure, or a malfunction within the valve itself. You should evaluate the connection, test the solenoid, and check for any valve malfunctions.
What causes IPM module protection in Gree Heat Pump?
The IPM Module protection in your Gree Heat Pump activates if the IPM Module temperature is too high, due to high ambient temperature, low voltage, or bad connections. Ensure the IPM Module is operating within proper temperature limits, and assess the ambient conditions and connections.
What causes high current protection in Gree Heat Pump?
High current protection in your Gree Heat Pump may be due to an unstable power supply with a voltage range that's too large. You should verify the stability of the power supply and make sure the voltage range is within acceptable limits.
Why does my Gree Heat Pump have compressor overload protection?
Compressor overload protection in your Gree Heat Pump can be triggered by a few reasons: low refrigerant charge, a blocked capillary, or a failure in the compressor motor. It's recommended to inspect the refrigerant charge, check for any blockages in the capillary, and assess the condition of the compressor motor.
General| Cooling Capacity | 9, 000 BTU/h |
|---|---|
| Voltage | 230V |
| Coefficient of Performance (COP) | 3.6 |
| Refrigerant | R410A |
| Noise Level (Indoor) | 42 dB(A) |
| Noise Level (Outdoor) | 50 dB |
To Next Page