Gree FP-170WAF-R

Test Operation & Troubleshooting & Maintenance
74
②
Remove the fan blades
 Loosen the fixing screws with a special
Allen screwdriver or spanner from the
notch (see Fig.2)
 Drag the fan blades out.
③
Remove the front volute casing
 Loosen the fixing screws (see Fig.1)
 Take out the front volute casing.
Fig.2
④
Remove the motor
 Loosen the fixing screws on the motor
and remove the clamping band and the
hoop (see Fig.3)
 Loosen the grounding screws and
disconnect the ground wire.
 Loosen the screws on the electric box
and remove the cover plate of it.
 Remove the connecting inserter of
motor from the terminal board of the
electric box and the capacitor.
 Cut the tie wire, disconnect the
connection wire, and take out the
motor.