G-Cloud
9
1）Notices for wiring
Please cut off the power of the indoor unit before installation. The power should be cut off
during the whole installation process.
2）Installation instruction
During assembly process, please make the panel with the reset button of
G-Cloud face to the user for convenient operation. After that, the user can perform reset
and other operations.
Do not install G-Cloud at damp place.
The installation position of G-Cloud is different for different models. For details,
please install it according to user requirements and actual installation position of the
model (the installation position of G-Cloud in above figure is only for reference).
To Next Page
Loading...
