Do install the circuit break. If not, it may cause malfunction.
Precautions
According to the local safety regulations, use qualified
power supply circuit and circuit break.
WARNING
Must follow the electric safety regulations when installing
the unit.
Be sure to cut off the power supply before proceeding
any work related to electricity and safety.
Don't use unqualified power cord.
Make sure the power supply matches with the requirement
of air conditioner. Unstable power supply or incorrect wiring
may result in electric shock, fire hazard or malfunction.
Please install proper power supply cables before using the
air conditioner.
Properly connect the live wire, neutral wire and
grounding wire of power socket.
Installation must be performed by qualified professionals.
Otherwise, it may cause personal injury or damage.
Attachment
An all-pole disconnection switch having a contact separation
of at least 3mm in all poles should be connected in fixed
wiring.
Including an circuit break with suitable capacity, please
note
the following table. Air switch should be included
magnet buckle
and heating buckle function, it can protect
the circuit-short and
overload.
Air Conditioner should be properly grounded. Incorrect
grounding may cause electric shock.
4
To Next Page
Loading...
Need help?
General
