To Next PageTo Next PageWhat to do if my Gree Air Conditioner has a malfunction of drive module sensor?
If there is a malfunction of the drive module sensor in your Gree Air Conditioner, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH18K3FI Air Conditioner won't start?
If your Gree Air Conditioner won't start, first check the power supply connection. If that's not the issue, inspect for electrical leakage and reset the leakage switch. Also, ensure the operating keys are unlocked. Finally, check the control loop for any failures.
Why is my Gree Air Conditioner not heating well?
If your Gree Air Conditioner isn't heating effectively, begin by cleaning or replacing the air filter. Make sure that all doors and windows are firmly closed. Increase the set room temperature. Check for refrigerant leaks. If the outdoor temperature is below -5°C, consider using an alternative heating source. Finally, check the control loop for any abnormalities.
What to do if my Gree GKH18K3FI Air Conditioner starts and then stops?
If your Gree Air Conditioner operates for a while and then stops, check for any obstacles in front of the condenser and remove them. Also, check the control loop for abnormalities. If you are using cooling operation when the outdoor ambient temperature is above 48°C, select a different operation mode.
What to do if my Gree Air Conditioner has a malfunction of drive current?
If there is a malfunction of drive current in your Gree Air Conditioner, please turn off the unit and ask a professional for maintenance.
What to do if my Gree Air Conditioner has a malfunction of the condenser temperature sensor?
If your Gree Air Conditioner is showing a malfunction of the condenser temperature sensor, please turn off the unit and ask a professional for maintenance.
What to do if my Gree Air Conditioner has a malfunction of the indoor ambient temperature sensor?
If there is a malfunction of the indoor ambient temperature sensor in your Gree Air Conditioner, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH18K3FI has a malfunction of the evaporator temperature sensor?
If your Gree Air Conditioner is showing a malfunction of the evaporator temperature sensor, please turn off the unit and ask a professional for maintenance.
What should I do if my Gree GKH18K3FI has freeze protection?
If your Gree Air Conditioner is under freeze protection, please turn off the unit and ask a professional for maintenance.
What should I do if my Gree Air Conditioner has compressor phase protection?
If your Gree Air Conditioner indicates compressor phase protection, please turn off the unit and ask a professional for maintenance.
General| Brand | Gree |
|---|---|
| Model | GKH18K3FI |
| Category | Air Conditioner |
| Language | English |
Critical safety warnings and precautions for installation and operation.
Details indoor and outdoor unit components and their functions.
Lists and describes standard accessory parts provided for installation.
Guidelines for selecting suitable indoor and outdoor installation locations.
Specifies requirements for connection pipes, including size and length limits.
Details electrical specifications for power supply, wiring, and fuse capacity.
Procedures for installing the indoor unit, including dimensions and mounting.
Procedures for installing the outdoor unit, including dimensions and drainage.
Steps for processing, bending, connecting, and insulating refrigerant pipes.
Process for system evacuation and checking for refrigerant leaks.
Instructions for installing the drain piping, including precautions and testing.
Steps and precautions for installing the unit's front panel.
Detailed instructions for wiring indoor and outdoor units and controllers.
Procedures for initial testing, including error code meanings.
Specifies the operating temperature limits for cooling and heating.
Identifies common failures and their possible causes for diagnosis.
Guidelines for regular maintenance tasks, including air filter cleaning.
