Service Manual
Installation and Maintenance
52
ProcedureStep
electric box cover
electric box
4.Remove remote control cover plate
5.Remove electric box cover
6.Remove electric box
remote cover plate
screw
screw
screw
Twist off the 2 screws used for xing the
electric box cover and then remove the
electric box cover.
Twist off the 2 screws used for xing the
electric and the screws on earthing wire
with screwdriver and then remove the
electric box.
Twist off the 3 screws used for xing
the remote control cover plate and then
remove the remote control cover plate.