Service Manual
Installation and Maintenance
53
screw
connection board
Procedure
Step
swing plate sub-assy
auxiliary electric heating part
7.Remove connection board
8.Remove swing plate sub-assy
9.Remove auxiliary electric heating parts(not
available for cooling only unit)
screw
screw
screw
Twist off the 2 xing screws used for xing
the auxiliary electric heating part with
screwdriver and pull the auxiliary electric
heating part outward slightly with handle
and pull it upward, then the auxiliary
electric heating part can be removed.
Twist off the 2 xing screws used for xing
the swing plate sub-assy, pull it upward
and then remove the swing plate sub-
assy.
Twist off the 5 xing screw used for xing
the connection board with screwdriver
and then remove the connection board.
To Next Page
Loading...
