42
Installation and Maintenance
Service Manual
10. Remove centrifugal blade
Remove one nut fixing the centrifugal
blade, and then pull the centrifugal blade
outwards to remove it.
11. Remove fixing bracket of motor
Remove 3
nuts on fixing bracket of motor,
and then pull the fixing bracket of motor
outwards to remove it.
12. Remove press plate of motor wire
Loosen clasps between press plate of
motor wire and bottom case, and then
pull the press plate of motor wire
outwards to remove it.
clasps
press plate of
motor
wire
nuts
fixing bracket
of motor
centrifugal blade
nut
To Next Page
Loading...
