Why does my Gree Livo GEN3 LIVV30HP230V1A have high pressure protection?
If your Gree Air Conditioner system is experiencing high pressure protection, it could be due to: * An overabundance of refrigerant. * Poor heat exchange, possibly due to a bad radiating environment. * An ambient temperature that is too high.
How to fix Gree Air Conditioner limiting frequency because of high module temperature?
If your Gree Air Conditioner is limiting or decreasing frequency due to high module temperature: 1. De-energize the complete unit for 20 minutes to allow discharging. 2. Check if the thermal grease on the IPM Module of the outdoor control radiator is tightly inserted. 3. If the issue persists, replace the control panel AP1.
Why is my Gree Livo GEN3 LIVV30HP230V1A Air Conditioner in defect of refrigerant?
If your Gree Air Conditioner has a refrigerant defect, it could be caused by: * A refrigerant leak. * An indoor evaporator temperature sensor that is not working correctly. * A blockage somewhere in the unit.
How to fix EEPROM malfunction in Gree Air Conditioner?
To address an EEPROM malfunction in your Gree Air Conditioner, replace the outdoor control panel AP1.
General| Brand | Gree |
|---|---|
| Model | Livo GEN3 LIVV30HP230V1A |
| Category | Air Conditioner |
| Language | English |
To Next Page