Gree GKH30K3HI - Page 92

U-Match Series Service Manual
89
3. Remove gas liquid
separator.
1. Discharge the refrigerant
inside the pipeline and
recycle the refrigerant during
discharging;
2. Unsolder the 4-way valve
assy from gas liquid
separator;
3. Remove the gas liquid
separator.
4. Remove compressor
1. Discharge the refrigerant
inside the pipeline and
recycle the refrigerant during
discharging;
2. Unsolder the 4-way valve
assy from compressor;
3. Remove the nut fixing
compressor;
4. Take away the
compressor from chassis.
5. Assemble unit
Assemble the unit in the
reverse procedures of
disassembly.