To Next PageTo Next PageWhat should I do if my Gree GKH36K3FI Air Conditioner has freeze protection?
If your Gree Air Conditioner is under freeze protection, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH36K3FI is showing AC current protection?
If your Gree Air Conditioner displays AC current protection, please turn off the unit and ask a professional for maintenance.
What should I do if my Gree GKH36K3FI has compressor phase protection?
If your Gree Air Conditioner indicates compressor phase protection, please turn off the unit and ask a professional for maintenance.
What should I do if my Gree Air Conditioner is showing overcurrent protection?
If your Gree Air Conditioner displays overcurrent protection, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH36K3FI is having a start-up failure?
If your Gree Air Conditioner fails to start up, please turn off the unit and ask a professional for maintenance.
What should I do if my Gree GKH36K3FI Air Conditioner has power protection?
In case of power protection issue with your Gree Air Conditioner, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH36K3FI is showing overload protection?
If your Gree Air Conditioner indicates overload protection, please turn off the unit and ask a professional for maintenance.
What to do if my Gree Air Conditioner displays a communication malfunction?
If your Gree Air Conditioner is showing a communication malfunction, please turn off the unit and ask a professional for maintenance.
What to do if my Gree GKH36K3FI starts and then stops?
If your Gree Air Conditioner operates for a while and then stops, check for any obstacles in front of the condenser and remove them. Also, check the control loop for abnormalities. If you are using cooling operation when the outdoor ambient temperature is above 48°C, select a different operation mode.
Why is my Gree GKH36K3FI not heating well?
If your Gree Air Conditioner isn't heating effectively, begin by cleaning or replacing the air filter. Make sure that all doors and windows are firmly closed. Increase the set room temperature. Check for refrigerant leaks. If the outdoor temperature is below -5°C, consider using an alternative heating source. Finally, check the control loop for any abnormalities.
General| Brand | Gree |
|---|---|
| Model | GKH36K3FI |
| Category | Air Conditioner |
| Language | English |
Lists furnished standard accessory parts for indoor and outdoor units.
Guides on selecting appropriate installation sites for indoor and outdoor units.
Specifies maximum connection pipe length, height difference, and pipe requirements.
Details electric wire size and fuse capacity requirements for the unit.
Covers dimensions, main body, suspension bolts, and leveling for indoor unit installation.
Provides instructions for installing the outdoor unit, including warnings about tilting and wind.
Details flare processing and bending techniques for connection pipes.
Covers procedures for vacuuming the system and checking for gas leaks.
Details installation of drain piping, including slope, size, and condensation prevention.
Provides precautions for installing the front panel and connecting pipes.
Outlines precautions for electrical wiring, including voltage and circuit requirements.
Explains error codes and procedures for trial operation and testing.
Lists the working temperature ranges for indoor and outdoor units in cooling and heating modes.
Provides a table of common failures and their possible reasons.
Details routine maintenance procedures, focusing on cleaning air filters.
