Exception Clauses
Manufacturer will bear no responsibilities when personal injury or pro
perty loss is caused by the
following reasons:
(1) Damage the product due to improper use or misuse of the product;
(2) Alter, change, maintain or use the product with other equipment without abiding by the
instruction manual of manufacturer;
(3) After verification, the defect of product is directly caused by corrosive gas;
(4) After verification, defects are due to improper operation during transportation of product;
(5) Operate, repair, maintain the unit without abiding by instruction manual or related regulations;
(6) After verification, the problem or dispute is caused by the quality specification or performance of
parts and components that produced by other manufacturers;
(7) The damage is caused by natural calamities, bad using environment or force majeure.
To Next Page
Loading...
Need help?
General
