EasyManua.ls Logo

Gree GMV-ND Series - User Manual

Gree GMV-ND Series
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
ORIGINAL INSTRUCTIONS, VER. 01 2020-12-04
USER MANUAL
[ GMV COMPACT 360° CASSETTE UNITS ]
GMV-ND15–56T/E-T

Table of Contents

Questions and Answers

  • F
    fcarlsonAug 11, 2025
    Why is my Gree GMV-ND not cooling properly?
    • J
      Joseph WhiteAug 11, 2025
      If your Gree Air Conditioner isn't cooling well, several factors could be the cause. Start by checking the air filter; a dirty or blocked filter can significantly reduce cooling performance, so clean or replace it. Make sure that doors and windows are closed. Also, ensure that the inlet and outlet of the IDU (Indoor Unit) are free from obstructions. If the cooling issue persists, the setting temperature may be too high, or there could be a refrigerant leak, so adjust the temperature and check for leaks. Finally, a failing room temperature sensor can also cause poor cooling; consider replacing or repairing it. Reducing the heat load in the room can also help.
  • S
    Shannon LoveAug 16, 2025
    How to fix a Gree Air Conditioner that won't start?
    • V
      Victoria VasquezAug 16, 2025
      If your Gree Air Conditioner won't start, begin by verifying that the power supply is properly connected. Then, inspect the circuit breaker to ensure it hasn't tripped due to a leakage of electricity. Check that the input voltage is correct and that the operation button is on. Finally, examine the control loop.
  • L
    Lisa AndersonAug 22, 2025
    Why is my Gree GMV-ND not heating well?
    • C
      Carrie BurnsAug 22, 2025
      If your Gree Air Conditioner isn't heating effectively, start by checking the air filter and clean or replace it if it's dirty or blocked. Ensure all doors and windows are closed to prevent heat loss. Verify that the setting temperature isn't too low, and increase it if necessary. Refrigerant leakage can also cause poor heating, so check for leaks and repair them. If the outdoor ambient temperature is lower than -5°C, the unit's performance may be affected; ensure operation within a suitable temperature range. Lastly, investigate the control circuit for any abnormalities.
  • P
    Phillip WalkerAug 29, 2025
    What to do if my Gree Air Conditioner stops running after a short time?
    • S
      sandra17Aug 29, 2025
      If your Gree Air Conditioner stops after running for a while, there could be a few reasons. First, check if the inlet or outlet of either the ODU (Outdoor Unit) or IDU (Indoor Unit) are blocked by any obstacles and remove them. Also, check the control loop. When the outdoor ambient temperature is higher than 43°C, set the unit in cooling mode.
  • E
    Elizabeth BrownSep 4, 2025
    Why doesn't the indoor fan start during heating in my Gree Air Conditioner?
    • J
      Julia DunnSep 4, 2025
      If the indoor fan of your Gree Air Conditioner doesn’t start during heating, check the positioning of the tube temperature sensor head and adjust it if necessary. Ensure the tube temperature sensor head is properly inserted. Inspect the wiring of the tube temperature sensor head for any breaks and repair them if needed. Also, check if the capacitor is leaking electricity and replace it if it is.

Gree GMV-ND Series Specifications

General IconGeneral
SeriesGMV-ND
RefrigerantR410A
Operating Temperature Range (Cooling)-5°C to 50°C
Operating Temperature Range (Heating)-20°C to 24°C
TypeVRF
Energy Efficiency Ratio (EER)3.3
Indoor Unit OptionsCassette, Ducted, Wall-mounted, Floor-standing
ControlCentral controller
Power Supply380-415V

Related product manuals