EasyManua.ls Logo

Gree GMV-ND36T/A-T - User Manual

Gree GMV-ND36T/A-T
53 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Change for life
Thank you for choosing Air Conditioners, please read this owner’s manual carefully before
operation and retain it for future reference.If you have lost the Owner’s Manual, please
contact the local agent or visit www.gree.com or sent email to global@gree.com.cn or
electronic version.
GREE reserves the right to interpret this manual which will be subject to any change due to
product improvement without further notice.
GREE Electric Appliances, Inc. of Zhuhai reserves the nal right to interpret this manual.
Multi Variable Air Conditioners
Cassette Type Indoor Unit
Models:
GMV-ND28T/A-T
GMV-ND36T/A-T
GMV-ND45T/A-T
GMV-ND50T/A-T
GMV-ND56T/A-T
GMV-ND63T/A-T
GMV-ND71T/A-T
GMV-ND80T/A-T
GMV-ND90T/A-T
GMV-ND100T/A-T
GMV-ND112T/A-T
GMV-ND125T/A-T
GMV-ND140T/A-T
GMV-ND160T/A-T
Owner's Manual
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.

Table of Contents

Other manuals for Gree GMV-ND36T/A-T

Preview: Service Manual
Service Manual227 pages

Questions and Answers

  • A
    Ashley HallAug 20, 2025
    Why is my Gree Air Conditioner not cooling properly?
    • J
      Jasmine RichardsonAug 20, 2025
      Several factors can cause a Gree Air Conditioner to have a poor cooling effect. Check the following: * Ensure the filter is clean; if dirty, clean or replace it. * Reduce the heat load in the room by decreasing the number of people or heat-generating devices. * Make sure all doors and windows are closed. * Verify that the inlet and outlet of the indoor unit are not blocked. * Lower the setting temperature. * Check refrigerant levels and refill if necessary, as insufficient refrigerant can also cause poor cooling.
  • C
    Christine PierceAug 22, 2025
    How to fix a Gree GMV-ND36T/A-T that won't start?
    • E
      Elizabeth WalshAug 22, 2025
      If your Gree Air Conditioner won’t start, consider these potential causes: * Check the power supply to ensure it is properly connected. * Inspect the circuit breaker; tripping may be caused by leakage of electricity. * Ensure the input voltage is adequate. * If the above steps don't resolve the issue, there may be a defect with the main PC-board; contact a service center for inspection.
  • J
    jamesdavidAug 25, 2025
    Why is my Gree GMV-ND36T/A-T Air Conditioner not cooling well?
    • C
      Christopher FlemingAug 25, 2025
      Several factors can cause a Gree Air Conditioner to have a poor cooling effect. The filter might be dirty, so try cleaning or replacing it. The room might have too much heat, so reduce the heat load. Make sure all doors and windows are closed. Check that the indoor unit's inlet and outlet aren't blocked. The temperature setting might be too high, so lower it. Finally, there might not be enough refrigerant due to a leak, so check for leaks and refill if needed.
  • D
    Donna RogersAug 26, 2025
    How to fix mode shock in Gree GMV-ND36T/A-T Air Conditioner?
    • E
      Eric WongAug 26, 2025
      If your Gree Air Conditioner is experiencing mode shock, try resetting the unit to eliminate the mode shock.
  • F
    flynchAug 27, 2025
    Why is my Gree GMV-ND36T/A-T's heating not working well?
    • A
      Ashley HernandezAug 28, 2025
      If your Gree Air Conditioner is not heating effectively, several factors could be responsible: * A dirty filter can restrict airflow; clean or replace it. * An open door or window can let heat escape; ensure all doors and windows are closed. * If the setting temperature is too low, increase it to your desired warmth level. * Low refrigerant levels due to leakage can also reduce heating performance; check refrigerant levels and refill if necessary.
  • R
    richardjonesAug 29, 2025
    What to do if my Gree GMV-ND36T/A-T Air Conditioner won't start?
    • A
      Alexander WeissAug 29, 2025
      If your Gree Air Conditioner won't start, begin by checking the power supply connection. If that's not the issue, reset the circuit breaker, as it may have tripped due to a leakage of electricity. Also, ensure the input voltage is correct. If none of these steps work, the main PC-board may be defective, and you should contact an authorized service center for repair.
  • L
    Lisa RiveraAug 31, 2025
    Why is my Gree Air Conditioner not heating properly?
    • A
      Alan RayAug 31, 2025
      A Gree Air Conditioner may have a poor heating effect due to several reasons. The filter may be dirty, so clean or replace it. Ensure all doors and windows are closed. The temperature setting might be too low, so increase it. There could also be insufficient refrigerant, possibly from a leak, so check for refrigerant leaks and refill as necessary.
  • R
    rmaciasSep 2, 2025
    What to do if my Gree GMV-ND36T/A-T shows a communication malfunction?
    • J
      Jason ParrishSep 2, 2025
      If your Gree Air Conditioner displays a communication malfunction, the first step is to check the communication wiring to ensure it is properly connected.
  • M
    mayolauraSep 4, 2025
    What to do if Gree GMV-ND36T/A-T Air Conditioner shows water overflow protection?
    • E
      Elizabeth NunezSep 4, 2025
      If your Gree Air Conditioner is experiencing water overflow protection, examine the water drainage system for any blockages that may be causing the issue.
  • R
    Robert TylerSep 6, 2025
    Why does my Gree GMV-ND36T/A-T Air Conditioner show indoor fan protection?
    • A
      Andrew HansenSep 6, 2025
      If your Gree Air Conditioner displays an indoor fan protection error, ensure the fan is not obstructed or frozen, which may be triggering the protection mechanism.

Summary

Safety Precautions

Product Introduction

Component Identification

Identifies key components of the indoor unit with numbered labels and names.

Rated Operating Conditions

Details indoor and outdoor temperature and humidity conditions for operation.

Unit Functions Overview

Lists available functions and their compatibility with different controllers.

Preparations for Installation

Standard Fittings List

Lists all standard accessories provided with the unit for installation.

Installation Location Selection

Provides guidelines for choosing the optimal installation position for the unit.

Communication Wire Selection

Details selection of communication wires for connecting indoor units and networks.

Power and Air Switch Wiring

Outlines power cord size and air switch capacity requirements.

Installation Instructions

Indoor Unit Installation Procedures

Covers ceiling opening, suspension bolt placement, and unit mounting procedures.

Refrigerant Pipe Connection

Details the process for connecting refrigerant pipes, including torque specifications.

Drainage Pipe Installation & Testing

Explains drainage pipe installation, gradient requirements, and system testing procedures.

Panel Installation and Connection

Guides on attaching the decorative panel and connecting its terminals.

Wired Controller Installation

Instructions for installing an optional wired controller.

Wiring Work

Wire & Terminal Board Connection

Describes how to connect wires to terminal boards, including single and stranded wires.

Power Cord Connection

Explains the requirement for unified power supply for all indoor units.

Indoor;Outdoor Communication Wiring

Details connecting communication wires between indoor and outdoor units.

Wired Controller Communication Wiring

Explains how to connect communication wires for the wired controller.

Wired Controller & Indoor Unit Network

Illuminates connections for wired controllers and indoor unit networks.

Routine Maintenance

Filter Cleaning Guide

Provides instructions for removing, cleaning, and drying the air filters.

Pre-Season Maintenance Checks

Lists checks to perform before the start of the cooling/heating season.

Post-Season Maintenance

Advises on actions to take after the unit is no longer in use for the season.

Table of Error Codes for Indoor Unit

Troubleshooting

Gree GMV-ND36T/A-T Specifications

General IconGeneral
BrandGree
ModelGMV-ND36T/A-T
CategoryAir Conditioner
LanguageEnglish

Related product manuals