EasyManua.ls Logo

Gree GMV-ND160T/A-T - User Manual

Gree GMV-ND160T/A-T
53 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Change for life
Thank you for choosing Air Conditioners, please read this owner’s manual carefully before
operation and retain it for future reference.If you have lost the Owner’s Manual, please
contact the local agent or visit www.gree.com or sent email to global@gree.com.cn or
electronic version.
GREE reserves the right to interpret this manual which will be subject to any change due to
product improvement without further notice.
GREE Electric Appliances, Inc. of Zhuhai reserves the nal right to interpret this manual.
Multi Variable Air Conditioners
Cassette Type Indoor Unit
Models:
GMV-ND28T/A-T
GMV-ND36T/A-T
GMV-ND45T/A-T
GMV-ND50T/A-T
GMV-ND56T/A-T
GMV-ND63T/A-T
GMV-ND71T/A-T
GMV-ND80T/A-T
GMV-ND90T/A-T
GMV-ND100T/A-T
GMV-ND112T/A-T
GMV-ND125T/A-T
GMV-ND140T/A-T
GMV-ND160T/A-T
Owner's Manual
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.

Table of Contents

Other manuals for Gree GMV-ND160T/A-T

Preview: Service Manual
Service Manual227 pages

Questions and Answers

  • A
    Alicia JohnsonAug 20, 2025
    Why is my Gree GMV-ND160T/A-T not cooling properly?
    • A
      angela08Aug 20, 2025
      Several factors can cause a Gree Air Conditioner to have a poor cooling effect. Check the following: * Ensure the filter is clean; if dirty, clean or replace it. * Reduce the heat load in the room by decreasing the number of people or heat-generating devices. * Make sure all doors and windows are closed. * Verify that the inlet and outlet of the indoor unit are not blocked. * Lower the setting temperature. * Check refrigerant levels and refill if necessary, as insufficient refrigerant can also cause poor cooling.
  • H
    Harold RussoAug 22, 2025
    How to fix a Gree Air Conditioner that won't start?
    • G
      George RiosAug 22, 2025
      If your Gree Air Conditioner won’t start, consider these potential causes: * Check the power supply to ensure it is properly connected. * Inspect the circuit breaker; tripping may be caused by leakage of electricity. * Ensure the input voltage is adequate. * If the above steps don't resolve the issue, there may be a defect with the main PC-board; contact a service center for inspection.
  • E
    Erik BradfordAug 25, 2025
    Why is my Gree GMV-ND160T/A-T not cooling well?
    • R
      Rhonda McmillanAug 25, 2025
      Several factors can cause a Gree Air Conditioner to have a poor cooling effect. The filter might be dirty, so try cleaning or replacing it. The room might have too much heat, so reduce the heat load. Make sure all doors and windows are closed. Check that the indoor unit's inlet and outlet aren't blocked. The temperature setting might be too high, so lower it. Finally, there might not be enough refrigerant due to a leak, so check for leaks and refill if needed.
  • K
    kphamAug 26, 2025
    How to fix mode shock in Gree GMV-ND160T/A-T?
    • J
      John MartinezAug 26, 2025
      If your Gree Air Conditioner is experiencing mode shock, try resetting the unit to eliminate the mode shock.
  • M
    Melissa BirdAug 27, 2025
    Why is my Gree GMV-ND160T/A-T's heating not working well?
    • G
      Garrett PalmerAug 27, 2025
      If your Gree Air Conditioner is not heating effectively, several factors could be responsible: * A dirty filter can restrict airflow; clean or replace it. * An open door or window can let heat escape; ensure all doors and windows are closed. * If the setting temperature is too low, increase it to your desired warmth level. * Low refrigerant levels due to leakage can also reduce heating performance; check refrigerant levels and refill if necessary.
  • C
    Connie BlairAug 29, 2025
    What to do if my Gree GMV-ND160T/A-T won't start?
    • L
      Lydia TylerAug 29, 2025
      If your Gree Air Conditioner won't start, begin by checking the power supply connection. If that's not the issue, reset the circuit breaker, as it may have tripped due to a leakage of electricity. Also, ensure the input voltage is correct. If none of these steps work, the main PC-board may be defective, and you should contact an authorized service center for repair.
  • E
    Erika HutchinsonAug 31, 2025
    Why is my Gree GMV-ND160T/A-T Air Conditioner not heating properly?
    • M
      Mark BooneAug 31, 2025
      A Gree Air Conditioner may have a poor heating effect due to several reasons. The filter may be dirty, so clean or replace it. Ensure all doors and windows are closed. The temperature setting might be too low, so increase it. There could also be insufficient refrigerant, possibly from a leak, so check for refrigerant leaks and refill as necessary.
  • J
    Jill GreenSep 2, 2025
    What to do if my Gree Air Conditioner shows a communication malfunction?
    • S
      Samuel DonovanSep 2, 2025
      If your Gree Air Conditioner displays a communication malfunction, the first step is to check the communication wiring to ensure it is properly connected.
  • S
    stephenskimberlySep 4, 2025
    What to do if Gree Air Conditioner shows water overflow protection?
    • M
      mchavezSep 4, 2025
      If your Gree Air Conditioner is experiencing water overflow protection, examine the water drainage system for any blockages that may be causing the issue.
  • M
    Michael HickmanSep 6, 2025
    Why does my Gree GMV-ND160T/A-T show indoor fan protection?
    • J
      jcarsonSep 6, 2025
      If your Gree Air Conditioner displays an indoor fan protection error, ensure the fan is not obstructed or frozen, which may be triggering the protection mechanism.

Summary

Safety Precautions

General Safety Guidelines

Key safety instructions for operating and handling the air conditioner unit.

Preparations for Installation

Installation Position and Wire Selection

Wiring and Power Requirements

Installation Instructions

Indoor Unit Mounting and Setup

Steps for opening ceiling, positioning bolts, and suspending the indoor unit.

Pipe Connections and Testing

Guide for connecting refrigerant and drainage pipes, including testing.

Panel and Controller Installation

Wiring Work

Wire and Terminal Connections

Power Cord and Communication Wiring

Guidelines for connecting power cords and communication wires for units and controllers.

Routine Maintenance

Filter Cleaning Procedure

Seasonal Maintenance Checks

Troubleshooting

Gree GMV-ND160T/A-T Specifications

General IconGeneral
BrandGree
ModelGMV-ND160T/A-T
CategoryAir Conditioner
LanguageEnglish

Related product manuals