Need help?Do you have a question about the Gree GMV-ND140L/A-T and is the answer not in the manual?
General| Brand | Gree |
|---|---|
| Model | GMV-ND140L/A-T |
| Category | Air Conditioner |
| Language | English |
Provides critical warnings and precautions for safe operation and installation.
Details the main parts and overall structure of the indoor unit.
Specifies the environmental conditions for the unit's rated performance.
Illustrates the necessary clearances around the unit for proper installation.
Details the specifications and type of communication wiring required.
Specifies the electrical wiring standards and specifications for installation.
Provides the physical steps and dimensions for installing the indoor unit.
Explains how to set the master indoor unit and troubleshoot initial setup.
Instructions for creating the wall opening for pipes and wiring.
Details the correct method for installing the condensate drain pipes.
Steps for connecting the refrigerant pipes to the unit.
Instructions for installing the baffle to secure pipes and drainage.
Important notes and precautions before performing electrical wiring.
Explains how to connect wires to the unit's terminal board.
Details the procedure for connecting the main power supply cord.
Guides the connection of communication cables between indoor and outdoor units.
Instructions for connecting the communication cable for the wired controller.
Explains network connections for wired controllers and multiple indoor units.
Provides an overview of the buttons and indicators on the control panel.
Details the procedure for turning the unit on and off.
Describes how to select different operating modes.
Details how to adjust the desired temperature using the control buttons.
Covers advanced functions like swing, X-fan, and timer settings.
Explains fan speed adjustment and special unit functions.
Provides tips for optimal energy efficiency and user comfort.
Step-by-step guide for safely removing and cleaning the unit's front panel.
Instructions on how to disassemble, clean, and reinstall the air filters.
Checklist for pre-season inspection and preparation of the unit.
Actions to take for proper shutdown and storage after the season.
Lists various error codes and their corresponding meanings for troubleshooting.
Helps diagnose common operational issues and their potential causes.
Lists specific symptoms that require contacting the service center.
Information on how to obtain support for quality or other issues.
To Next Page