To Next PageTo Next PageWhat to do if the power supply of wired controller is faulted in my Gree Air Conditioner?
If the wired controller of your Gree Air Conditioner is not getting power, inspect the power supply connections to ensure they are properly connected.
What to do if my Gree GMV-ND28PHS/B-T says no main indoor unit?
If your Gree Air Conditioner system indicates that there is no main indoor unit, check the connection to the main indoor unit to ensure it is properly connected.
What to do if there is a wrong number of indoor unit for one-to-more indoor unit in Gree Air Conditioner?
If you're using a one-to-more indoor unit system with your Gree Air Conditioner and suspect an issue with the number of units, verify the number of connected indoor units.
General| Brand | Gree |
|---|---|
| Model | GMV-ND28PHS/B-T |
| Category | Air Conditioner |
| Language | English |
Covers warning symbols, installation responsibilities, grounding, and refrigerant safety.
Identifies and labels the main parts of the indoor unit.
Specifies the operating conditions for cooling and heating modes.
Lists and describes the standard fittings supplied with the unit.
Provides guidelines for selecting an appropriate installation location.
Specifies requirements for communication wiring between units.
Details power cord size and air switch capacity specifications.
Detailed instructions for mounting and securing the indoor unit, including dimensions.
Procedure for connecting the refrigerant pipes to the unit.
Covers the installation and testing of the unit's drainage system.
Instructions for installing the air ducts for air supply and return.
Instructions for connecting and installing the fresh air pipe, if applicable.
Procedure for installing the wired controller for unit operation.
Details on connecting wires to terminals and patch boards.
Instructions for safely connecting the unit's power cord.
Guidance on connecting communication wires between indoor and outdoor units.
Procedure for connecting communication wires for the wired controller.
Explains how to connect wired controllers to the indoor unit network.
Procedure for cleaning the air filters of the indoor unit.
Checks and tasks to perform before the cooling or heating season begins.
Tasks to perform after the unit has been used for the season.
