Gree GPC10AN-K5NNA1A - Page 50

48
Maintenance
Service Manual
Inner height of the window:20.5" (520mm)- 38.5" (980mm)
Use the window panel and the adjustment panel.
(1) Open the window sash and place the window panel on
the window frame.
(2) Slide the adjustment panel to fit the window frame
height.
(3) Secure the window panel to the window frame with
screws.
Inner height of the window:38.5" (980mm) - 59" (1500mm)
Use the window panel, the adjustment panel and the
extension panel.
(1) Open the window sash and place the window panel on
the window frame.
(2) Slide the adjustment and extension panels to t the
window frame height.
(3) Secure the window panel to the window frame with
screws.
4. Close the window sash securely against the Window
panel.
5. Stuff the foam seal B between the glass and the
window to prevent air and insects
from getting into the room.
6. Attach the bracket with a screw.
7.Installation of Heat Discharge Pipe
Connect joint B to joint C .
8. Rotate joint A and joint B+C into the two ends of heat
discharge pipe.
9. Insert joint A of heat discharge pipe (the side with
"TOP" is upwards) into the groove until you hear a sound.
Cut
Window panel
Exhaust cover
20.5"
20.5" - 38.5"
Adjustment panel
Extension panel
38.5"- 59"
Adjustment panel
Bracket
Bracket
Bracket
Joint C
Joint
B
Clockwise
Anti-clockwise
Joint
A
Heat discharge pipe
Joint B+C
Groove
Clasp
The side with "TOP" is upwards