Gree GPE12AF-K3NNA7D

54
Maintenance
Service Manual
ProduceSteps
7
8
9
Remove reversion loop, centrifugal
blade
Remove screws fixing reversion loop
and then remove the reversion loop.
Remove nuts fixing centrifugal blade,
and then remove the centrifugal blade.
screw
nut
reversion loop
centrifugal blade
Remove motor, propeller housing and
guard grille
Remove screws fixing guard grille and
motor, and then remove the guard grille
and motor. Take out the propeller
housing.
screw
screw
motor
propeller ho using
guard grille
screw
Remove evaporator and middle isolation
sheet
Unsolder the spotweld connectedwith
evaporator and then remove the
evaporator. Remove screws fixing
middle isolation sheet and then remove
the middle isolation sheet.
middle isolation sheet
evaporator