26
Maintenance
Service Manual
● Use two small wood screws on each side to attach the protective screen onto the outside of the exhaust adapter.
3. Attach Protective Screen Tooutside of Exhaust Adapter
● Remove the appropriate plugs (save for future use) from the window slider and rain deector to prepare for either a double-hung
window installation or a slider window installation. Line up the holes on the rain deector and the window slider. Use the four bolts,
splitring washers and nuts to attach the rain deector onto the window slider.
4. Install Rain Ddectorto Outside of Adjustable Window Slider
Double-Hung Window Installation
Slider Window Installation
Leave these two bolts in place for double-hung window installations
Outside
Leave these two plugs in place for sli-ding window installations
Outside
5. Install Window Slider in Window
1. To allow the window to close properly around the adjustable window slider, for inclined window sill, attach a piece of wood to the
sill at the back of the window stool. (Note: For a at sill, no wood is needed.)
(
1) For Double-Hung Window
To Next Page
Loading...
