Gree GPH12AF-K3NNA7A

27
Maintenance
Service Manual
Wood Piece
WIDTH: 1″
Length: Long enough to t inside the window frame.
Thickness: To determine the thickness, place a piece of wood on the sill behind the window stool to make it the same height as the
stool.
Inside
Stool
Sill
Wood (same height as stool)
Attach securely with nails or screws provided by the installer.
2. Cut the window sash seal (adhesivebacked) to the window width and stick the adhesive side to the bottom of the sash. Cut the
window stool seal (non-adhesive backed) to the window width and place on the window stool.
Window
sash seal
Window stool seal
Inside
3. If the window slider is shorter than the width of the window, pull the sliding arm out to the width of the window.
If the window slider is longer than the width of the window, cut the slider arm to the width of the window.
If the two-piece window slider is too short for the width of the window, attach and use the third piece of the slider.
Third piece of slider
for extra wide windows
Window stool
Inside
4. Attach the slider to the stool through one of its holes using a large wood screw.
Window
stool
Large
wood
screw
Inside