28
Maintenance
Service Manual
5. Pull the window down against the top of the window slider.
6. Hook the two window slider brackets over the bottom edge of the window slider and attach to the
window stool using two large
wood
screws.
Window slider brackets
7. Cut the foam top window gasket to the window width.Stuff the foam between the glass and the window to prevent air and
insects from getting into the room.
8. Attach the window locking bracket with one large wood screw.
(2) For Slider Window
1. Cut the window seal (adhesive-backed) to the window height and stick the adh-esive side to the inner window sliding face, as shown
above.
2. If the window slider is shorter than the height of the window, pull the sliding arm out to the height of the window.
If the window slider is longer than the height of the window, cut the slider arm to the height of the window.
If the two-piece window slider is too short for the height of the window, attach and use the third piece of the slider.
Inside
Third piece of slider for
extra long windows
To Next Page
Loading...
