29
Maintenance
Service Manual
3. Attach the top of the slider to the window face using a large wood screw through one of its holes.
Large wood screw
Inside
4. Slide the window against the edge of the window slider.
5. If applicable, hook the two window slider brackets over the side edge of the window slider and attach to the inner window
sliding face using two large wood screws.
6. Attach the window locking bracket with one large wood screw.
Window locking bracket
1. Rotate joint A and joint B clockwise into the two ends of exhaust hose.
6. Attach Exhaust Hose
joint A
joint B
exhaust hose
clockwise
clockwise
To Next Page
Loading...
