69
Maintenance
Service Manual
Step Procedure
12.
13.
14.
Remove supporting board and supporting
strip
Remove 4-way valve interface
Remove condenser assy
Unscrew 4 screws to remove
supporting board 1 and supporting strip.
Supporting board 1
Screws
Screws
4-way valve interface
4-way valve interface
Capillary Sub-assy
Screws
Condenser Assy
Supporting Strip
Unscrew screws to remove the
4-way valve interface and capillary
sub-assy.
Unscrew screws to remove condenser
assy.
To Next Page
Loading...