AIR-TO-WATER HEAT PUMP INSTALLATION
70
Step3：Attaching indoor unit to the wall make use of accessory expansion
bolt
C CAUTION!
While lifting the indoor unit, at least two persons should be joined. Weight of
the indoor unit is almost 52kg.
Precautions on Installation of Indoor Unit
¾ Indoor unit shall be vertically mounted on the wall of the room with expansion
bolt.
¾ Keep the Indoor unit away from heat sources such as heat sink and so on in the
room as much as possible.
¾ Keep the indoor unit as close as possible to outdoor unit. Level distance between
connection pipes can not exceed 30m and vertical distance can not exceed 15m.
Expansion bolt
！
Install wall
To Next Page
Loading...
