Need help?Do you have a question about the Gree GSW12-22L/A and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
| Cooling Capacity | 12000 BTU/h |
Illustrates the refrigerant flow and component interactions for cooling-only operation.
Shows the refrigerant cycle for both cooling and heating modes, including 4-way valve function.
Details temperature parameters, fundamental functions, and protection mechanisms for PCB manual 1.
Covers temperature, fundamental, and protection functions for PCB manual 2, including DRY and HEAT modes.
Identifies buttons and displays on the wireless remote control and their basic functions.
Describes additional functions and display elements of the wireless remote control when the cover is removed.
Explains how to operate the unit in COOL mode using the remote control, including temperature settings.
Guides the user on operating the unit in HEAT mode, covering temperature and fan speed adjustments.
Instructions for operating the unit in DRY mode, noting constant fan speed and temperature settings.
Explains the AUTO mode where the unit automatically selects COOL, HEAT, or DRY based on indoor temperature.
Details how to set timer ON and timer OFF functions for controlling unit operation times.
Describes the SLEEP mode function, which adjusts temperature settings gradually for comfort.
Provides instructions on how to properly insert batteries into the wireless remote control.
Step-by-step guide for disassembling the indoor unit, covering front panel, filters, louvers, and internal components.
Instructions for disassembling the top cover, rear grill, front grill, electric box, and axial flow fan of the smaller outdoor unit.
Steps for disassembling the top cover, rear grill, front grill, electric box, axial flow fan, and 4-way valve of the big outdoor unit.
Guide for disassembling the right handle, front grill, rear grill, electric box cover, supporting plate, and axial flow fan of the plastic case outdoor unit.
Exploded diagram showing all components of the indoor unit with numerical labels for identification.
Table listing all indoor unit parts, their part numbers, and quantities for various models.
Exploded diagram illustrating the components of the small outdoor unit with numerical labels.
List of spare parts for the smaller outdoor unit, including part numbers and quantities for different models.
Exploded diagram showing the components of the big outdoor unit with numerical labels.
Comprehensive list of parts for the big outdoor unit, including part numbers and quantities for various models.
Instructions for removing, cleaning, and installing the front panel of the indoor unit.
Steps for removing, cleaning, and reinstalling the air filter of the indoor unit.
Guidelines for choosing suitable indoor and outdoor unit locations, considering airflow, heat, steam, and ventilation.
Detailed steps for installing the indoor unit, including rear panel, piping holes, drainage hose, and connecting pipes.
Instructions for connecting pipes, wiring, and performing vacuum/leakage detection for the outdoor unit installation.
Checklist for verifying proper installation, leakage, insulation, voltage, wiring, and unit grounding after setup.
Troubleshooting steps for issues preventing the unit from starting, such as power supply or wiring problems.
Solutions for common cooling or heating malfunctions, including refrigerant issues, fan problems, and compressor faults.
To Next Page
