To Next PageTo Next Page
Need help?Do you have a question about the Gree GUD160T/A-T and is the answer not in the manual?
General| Cooling Capacity | 16.0 kW |
|---|---|
| Heating Capacity | 18.0 kW |
| Refrigerant | R410A |
| Noise Level (Indoor Unit) | 46 dB(A) |
| Power Supply | 380-415V/3Ph/50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
Details the layout and components of indoor and outdoor units, including connections and accessories.
Specifies the acceptable outdoor and indoor temperature ranges for cooling and heating operations.
Lists and describes the standard accessories included with the indoor unit for installation.
Covers pre-installation notices, refrigerant concentration, and site selection criteria for best performance.
Provides detailed instructions for installing the indoor and outdoor units, including connection pipes and wiring.
Outlines the requirements and notices for electrical installation, including wiring, parameters, and safety.
Lists essential checks to be performed after installation to ensure proper operation and safety compliance.
Details the procedure for testing the unit after installation, including preparation and operation checks.
Lists common problems and their potential causes and corrective measures before formal maintenance is required.
Explains error codes displayed on the unit or controller, aiding in troubleshooting and diagnosis.
Covers general warnings and notices for unit maintenance and cleaning procedures for optimal performance.
