DC Inverter U-match Series Cassette Type Unit
36
decorative front panel, adjust the height of the unit again (as shown below).
No seam
If the lifting level of indoor unit and the drain pipeline
won't be affected, it's fine to adjust the height of
indoor unit through the holes on the corners of the
front panel.
(3) After installing the front panel, make sure there’s no gap between the unit and
the front panel.
(4) Circuit of the decorative front panel.
Connect the front panel to the main body through the corresponding slots.
Match the slots according to their different size.
Match the corresponding slots
To Next Page
Loading...