GREE U-Match 5 SERIES UNIT SERVICE MANUAL
104
Note: Before removing the front panel, make sure power is cut off.
●Attach the grill back in place and
tighten up the screws.
8. Install the upper cover plate.
●Tighten up the screws around
the upper cover plate.
Disassembly of compressor
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
●Loosen the securing screws of
the wires with a screwdriver.
●Remove the wires.
Note: When removing the wires,
mark the wire terminals
corresponding to their color so as
to avoid misconnection.
To Next Page
Loading...