Gree GUD71T/A-T

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
117
Removal and installation of drain pump
Step
Picture
Work instruction
2. Remove the water tray.
●Loosen the screws in the 4
corners and then remove the
water tray.
3. Remove the drain pipe
and loosen the screws of
water pump.
●Take out the drain pipe and
use a screwdriver to loosen the
screws of water pump.
4. Remove and replace the
pump.
●Remove the pump and replace
with a new one.
5. Connect the drain pipe
and tighten the screws of
water pump.
●Connect the drain pipe and
tighten the screws of water
pump.
6. Install the water tray and
tighten the screws.
●Direct the 4 corners of the
water tray to the 4 corners of the
unit and press them. Then use a
screwdriver to tighten the
screws.