Gree GVH24AK-K3DNC6A - Page 19

16
Technical Information
Service Manual
●When the unit is not in function setting while in unit on status, touch the slide bar to make it slide
from left to right to increase set temperature; touch the slide bar to make it slide from tight to left to
decrease set temperature; temperature setting range is 16
o
C~ 30
o
C (The slide bar is not available for
setting temperature under auto and E-joy modes).
●Under function setting status, press function button to select the function. That function’s characterwill ash and then conrm or cancel it.
(1) Timer: Set timer and adjust the time within 0.5~25h. When set timer t hrough control panel, the time will change every 0.5h.
(2) Eco-wind: turn on or turn off eco-wind function.
(3) Set: Set temperature display on or off.
(4) Room temp.: Room temperature display on or off.
●Pressing " " and " " button at the same time for 3s, all button functions on the displayer are shielded. When pressing any button, the
buzzer will give out a sound and "LC" will blink on the nixietube for three times to remind user that the buttons are locked and then resume
normal display. Press these two buttons at the same time for 3s again to cancel shielding function and then the display resumes normal
status.
Slide Bar
Function Buttons and Displayer (Display)
1. Set
Display set temperature.
2. Room Temp
Display indoor ambient temperature.
3. Defrost
When defrost icon is bright, it means the unit is in defrosting.
4. Fan
Display fan speed with fan speed icon in dynamic display. When
the arrow icon is in setting fan speed, the arrows corresponding
to the fan speed is all bright. When fan speed has been set, the
arrows display dynamically and circularly with increasing one
arrow every 0.5 second.
5. Up&down Swing
Display up and down swing status.
6. Display left and right swing status.
Display indoor ambient temperature.
7. E-heater Function
When this icon is bright, it means E-heater function is activated.
8. Timer Function
When this icon is bright, it means timer function is activated.
9. Eco-wind Function
When this icon is bright, it means eco-wind function is activated.
10. Purify Function
When this icon is bright, it means purify function is set.
11. Auto Function
When this icon is bright, it means auto mode is set.
12. Fan Function
When this icon is bright, it means fan mode is set.
13. Dry Function
When this icon is bright, it means dry mode is set.
14. Heat Function
When this icon is bright, it means heat mode is set.
15. Cool Function
When this icon is bright, it means cool mode is set.
16. WiFi Function
When this icon is bright, it means WiFi function is activated.
Auto
:
Quiet
:
Low
:
Medium low:
Medium:
Medium high:
High:
Turbo: