Service Manual
14
Technical Information
● Quiet and turbo can be set by pressing fan button under cool and heat mode.
● Fan speed is defaulted at low fan speed and it can’t be adjusted under dry mode.
button.
● This button is turned for turning on or turning off the up&down swing.
button
● This button is turned for turning on or turning off the left&right swing.
The buttons for this series model adopt touch buttons. This series model
without purification function and
Display set temperature.
Display indoor ambient temperature.
When the characters are bright, it in-
dicates the clean function is turned on.
CLEAN
ƽ
When the characters are bright, it in-
dicates the fan function is turned on.
FAN
ƽ
When this characters are bright, it in-
dicates the purification function is
turned on (this function is not available
for this series model)
PURIFY
ƽ
ƽ
Display up&down swing status.
UP & DOWN
Display left&right swing status.
LEFT & RIGHT
ƽ
When the characters are bright, it in-
dicates the X-fan function is turned on.
X-FAN
ƽ
When the characters are bright, it in-
dicates the E-heater function is turned
on.
E-HEATER
ƽ
When the characters are bright, it in-
this series model)
dicates the timer function is turned on.
TIMER
ƽ
When the characters of “SPEED” are
bright, “ ” indicates low fan speed;
“ ” indicates medium fan speed;
“ ” indicates high fan speed.
“TURBO” indicates turbo fan.
Under auto fan speed, the accrual
target fan speed is displayed.
SPEED & TURBO
When the characters are bright, it in-
dicates the cool mode is turned on.
COOL
When the characters are bright, it in-
dicates the heat mode is turned on.
HEAT
When the characters are bright, it in-
dicates the dry mode is turned on.
DRY
When the characters are bright, it in-
dicates the auto mode is turned on.
AUTO
When the characters are bright, it in-
dicates the defrosting function is
turned on.
DEFROST
When the characters are bright, it in-
dicates the quiet function is turned on.
UP
(this function is not available for
To Next Page
Loading...
