39
Removal Procedure
10. Removal Procedure
Warning
Be sure to wait for a minimum of 10 minutes after
turning off all power supplies before disassembly.
erudecorPspetS
1.Before disassembly
2.Remove filter and horizontal louver
Open the front panel .
Push the fi lter inward and then draw itupward
to remove it.
Remove axial sleeve of horizontal louver and
bend the louver slightly. Then remove the
louver.
2
3
1
Filter
Horizontal louver
07
ǃ
09
ǃ
12K Unit
To Next Page
Loading...