69
Installation and Maintenance
Service Manual
Step Procedure
6. Remove Decorative borad(Left) and Left side plate
Press the clap at the top of the left decorative board
and turn it over. Once the top part is separated, lift
it upwards and then remove the decorative board.
Remove 2 screws used for fixing the left side
panel, extend your hand to the handle and press it
upwards forcibly to let the claps at the top part of
the left side plate be separated. Pull the left side
plate outwards to remove it.
7.Remove Decorative borad(Right) and Right side plate
Remove the right decorative board by the method
as above.
Remove the screws used for fixing the right side
plate, and then remove it.
Botton
Decorative Borad
Screws
Left Side Plate
Screws
Handle
Clasp
To Next Page
Loading...
