Gree GWH12NB-K3NNB1C


)XQFWLRQDQG&RQWURO
)XQFWLRQDQG&RQWURO
5HPRWH&RQWURO2SHUDWLRQV
2
7
4
3
8
6
5
1
Press it to start or stop operation.
ON/OFF
1
MODE
Press it to select operation mode(AUTO/COOL/DRY/FAN/HEAT).
2
+
: Press it to increase temperature setting.
3
-
: Press it to decrease temperature setting.
4
FAN
Press it to set fan speed.
5
TIMER
Press it set auto-on/auto-off timer.
8
SLEEP
7
Press it set swing angle.
6
SWING
Press this button to start the unit operation .Press this button again to stop the unit operation.
ON/OFF :
MODE :
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set temperature. In
AUTO mode, set temperature is not adjustable.
Press this button to decrease set temperature.Holding it down above 2 seconds rapidly decreases set temperature. In
AUTO mode, set temperature is not adjustable.
.
Auto
4 deepS2 deepS1 deepS Speed 3
Press this key to activate or deactivate the swing.
1
2
3
4
5
6
AUTO
COOL
DRY
FAN HEAT
*
*Note:Only for models wit h heating
function.
:
:
FAN
+
-
:
SWING
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,then back
,
,
to
Each time you press the button,a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT
as the following:
*
,
to Auto.