Gree GWH12NB-K3NNB1C


5HPRYDO3URFHGXUH
1
2
Dssy
1
Step
Procedure
7
Remove evaporator
Turn over rear case and remove
connection screws between connecting
pipe clamp and rear case. Loosen clasps
between connecting pipe clamp and rear
case. Then remove connecting pipe
clamp.
Loosen connection screws among
evaporator, motor clamp and rear case.
Loosen clasps between
evaporator and
rear case. Slightly adjust pipeline. Then
remove evaporator.
Remove cross flow fan blade and motor
Remove 4 connection screws between
motor clamp and rear case. Then
remove motor clamp.
pipe clamp
evaporator
motor clamp