120
Disassembly of Outdoor Unit
9,000 & 12,000 btuh Warning - Wait 10 minutes a er power is disconnected before starting disassembly.
1. Before Disassembly
2. Remove top cover
Remove the screws connecting the top panel, le and right side
panel.
3. Remove handle
Remove the screws connecting the handle
Top
Panel
Handle
4. Remove panel and grille
Remove the screws holding the panel, Remove the screws con-
necting the panel grille and panel, then loosen clamp.
5. Remove top cover
Remove the screws holding the valve cover
6. Remove handle
Remove the screws connecting the le side panel and condenser
support board.
Panel
Grille
Valve Cover
Le side plate