Gree GWH12TB-D3DNA1A

123
1. Before Disassembly
2. Remove handle and valve cover
Remove the screws connecting the handle and valve cover, then
remove
3. Remove top panel
Remove the screws connecting the top panel
4. Remove front panel and grille
Remove the screws holding the grille and panel, remove the grille.
Remove remaining screws holding the panel, pull panel upward,
loosen the clamp on the right side, then rotate panel to the le
and remove panel.
5. Remove right side panel.
Remove the screws holding the rear grille, remove the screws
holding the right side panel,and valve support, pull it upward,
then remove.
Disassembly of Outdoor Unit
18,000 btuh Warning - Wait 10 minutes a er power is disconnected before starting disassembly.
Handle
Valve cover
Top Panel
Front Panel
Grille
Rear Grille
Right side panel