To Next PageTo Next PageWhy is my Gree Air Conditioner indoor unit emitting noise?
If you hear noise from the indoor unit of your Gree Air Conditioner, it may be due to the sound of the fan or compressor relay switching on or off. It can also occur when defrosting starts or stops, which is caused by the refrigerant flowing in the reverse direction.
Why Gree GWH18MC-D3DNA3D Air Conditioner unit cannot operate immediately?
When a Gree Air Conditioner is stopped and then restarted, it will not operate immediately. It will wait approximately 3 minutes to protect itself.
General| Brand | Gree |
|---|---|
| Model | GWH18MC-D3DNA3D |
| Category | Air Conditioner |
| Language | English |
Explains cooling principle and anti-freezing function of the air conditioner.
Details heating principle, defrosting, and anti-freezing function.
Controls turning the unit on and off, cancelling timer/sleep functions.
Selects operation modes like Auto, Cool, Dry, Fan, Heat.
Activates Sleep On/Off function for adjusted comfort and energy saving.
Adjusts fan speed between Auto, Low, Middle, and High.
Sets the clock time for the remote control display.
Controls the display light on the remote control.
Increases the set temperature or adjusts timer values.
Activates or deactivates Turbo mode for rapid cooling or heating.
Operates the X-FAN function to dry the indoor unit after operation.
Decreases the set temperature or adjusts timer values.
Switches between displaying set temperature and ambient temperature.
Sets the timer to turn the unit on at a specific time.
Sets the timer to turn the unit off at a specific time.
Controls the vertical swing angle of the air outlet louver.
Basic steps for operating the air conditioner with the remote.
Instructions for optional functions like Sleep, Timer, Light, and Turbo.
Explains special functions like X-FAN, Auto Run, and Turbo.
Describes how to lock/unlock the remote control keyboard to prevent accidental changes.
Details the operation of the swing up and down function of the air outlet.
Explains how to switch temperature display between Celsius and Fahrenheit.
Instructions for replacing remote control batteries and related precautions.
Lists items to check before operating the air conditioner.
Provides steps for maintaining the unit after use.
Key warnings and requirements for professional installation.
Guidelines for selecting an appropriate location for the unit.
Specific criteria for choosing the best placement for the indoor unit.
Electrical safety standards and precautions for installation.
Essential information and procedures for proper earthing of the appliance.
Additional installation notes and general information.
Instructions for mounting the rear panel of the indoor unit.
Steps for creating and preparing the wall opening for piping.
Guidance on connecting and securing the drain hose for condensate removal.
Procedures for wiring the indoor and outdoor units together.
Detailed steps for connecting the refrigerant pipes between units.
A checklist of items to verify after the unit is installed.
Steps for conducting the initial test run of the air conditioner.
How to install the healthy filter into the unit.
Methods for cleaning and maintaining the healthy filter.
Information regarding the expected lifespan and replacement of the healthy filter.
