Need help?Do you have a question about the Gree GWH18YE-D3DNA1A and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 18000 BTU/h |
| Heating Capacity | 18000 BTU/h |
| Refrigerant | R410A |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 35 kg |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
Details the technical specifications of the air conditioner models.
Provides graphs illustrating the operational characteristics of the unit.
Shows how cooling/heating capacity changes with ambient temperature.
Presents performance data for cooling and heating at rated frequency.
Displays graphs showing noise levels at different operating conditions.
Shows the physical dimensions and mounting details for the indoor unit.
Shows the physical dimensions and mounting details for the outdoor unit.
Illustrates the electrical connections for the unit.
Shows the layout and components of the Printed Circuit Boards.
Explains the buttons and display of the remote control.
Guides on using smartphone/tablet app for smart control.
Detailed steps for smart control setup and usage via app.
Explains the operating modes and key functions of the unit.
Visual guide showing required clearances for unit installation.
Lists components required for installation and checks.
Guidelines for choosing the optimal placement for the unit.
Specifies electrical safety and connection standards.
Step-by-step instructions for mounting the indoor unit.
Step-by-step instructions for mounting the outdoor unit.
Procedures for evacuating the system and checking for leaks.
Ensures proper function after installation and during initial run.
Information and installation for the optional wired control.
Lists all possible error codes and their causes.
Diagnostic flowcharts for identifying and resolving malfunctions.
Addresses common operational issues and their solutions.
Detailed list and diagram of indoor unit components.
Detailed list and diagram of outdoor unit components.
Step-by-step guide for disassembling the indoor unit.
Step-by-step guide for disassembling the outdoor unit.
Reference table for converting temperature units.
Details on pipe lengths, cooling capacity, and height differences.
Instructions for properly expanding pipes for refrigerant lines.
Table showing resistance values for temperature sensors at various temperatures.
To Next Page
