To Next PageTo Next Page
Need help?Do you have a question about the Gree GWH18QD-K3DNB2B and is the answer not in the manual?
General| Cooling Capacity | 18000 BTU/h |
|---|---|
| Heating Capacity | 18000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Type | Split System |
Lists the various indoor unit models covered in the manual.
Lists the various outdoor unit models covered in the manual.
Identifies the remote controller model.
Provides detailed technical specifications for indoor units.
Provides detailed technical specifications for outdoor units.
Displays performance curves for cooling and heating operations.
Shows how capacity changes with outdoor temperature.
Presents rated performance data under specific conditions.
Illustrates noise levels for indoor and outdoor units.
Provides dimensional drawings and measurements for indoor units.
Provides dimensional drawings and measurements for outdoor units.
Illustrates the refrigerant flow for cooling operation.
Shows refrigerant flow for both cooling and heating modes.
Illustrates the electrical connections for the unit.
Shows the layout of components on the printed circuit boards.
Explains the functions and operation of the remote controller.
Details the various operating modes and functions of the air conditioner.
Important safety guidelines for installation and maintenance procedures.
Safety guidelines for electrical connections and work.
Safety measures related to handling refrigerants.
Specific safety measures to follow during installation.
Visual guide for required clearances during installation.
Checklist for verifying all installation parts are present.
Guidelines for choosing the optimal installation site.
Specifies requirements for electrical connections and grounding.
Step-by-step guide for installing the indoor unit.
Step-by-step guide for installing the outdoor unit.
Procedures for evacuating the system and checking for leaks.
Steps for verifying the installation and performing initial operation tests.
Table detailing error codes and their possible causes.
Step-by-step guides for diagnosing and resolving common malfunctions.
Guidance on addressing common operational issues and failures.
Illustrated breakdown of indoor unit components with part numbers.
Illustrated breakdown of outdoor unit components with part numbers.
Step-by-step instructions for disassembling the indoor unit.
Step-by-step instructions for disassembling the outdoor unit.
Conversion table for temperature units.
Guidelines for connecting refrigerant pipes.
Instructions for properly expanding refrigerant pipes.
Tables of resistance values for temperature sensors.
