To Next PageTo Next Page
Need help?Do you have a question about the Gree GWH18QD-K3DNA1G and is the answer not in the manual?
General| Cooling Capacity | 18000 BTU/h |
|---|---|
| Heating Capacity | 18000 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Indoor Unit Dimensions (LxWxH) | 970 x 300 x 224 mm |
| Outdoor Unit Dimensions (LxWxH) | 848 x 596 x 320 mm |
| Noise Level (Indoor Unit) | 42 dB(A) |
| Air Flow (Indoor Unit) | 850 m³/h |
| Type | Split System |
| Operating Temperature (Cooling) | 18°C to 43°C |
Overview of indoor units, outdoor units, and remote controller models.
Detailed technical specifications for indoor and outdoor units, including capacities and dimensions.
Graphs illustrating cooling and heating performance based on compressor speed.
Charts showing how cooling/heating capacity changes with outdoor temperature.
Performance data at rated conditions, including pressures and temperatures.
Graphs showing noise levels for indoor and outdoor units based on operating parameters.
Visual representation of indoor unit dimensions and mounting details.
Schematic showing the refrigerant flow for 18K and 24K models.
Wiring diagrams and PCB layout for indoor and outdoor units.
Explanation of remote controller functions, icons, and operational modes.
Detailed technical specifications specific to outdoor units.
Conditions and logic for initiating and ending the defrosting cycle.
Operational logic for compressor, fans, and 4-way valve in different modes.
Detailed descriptions of various protections like overload, overcurrent, and sensor failures.
Important notes and guidelines for proper installation and maintenance procedures.
Critical safety warnings for installation and maintenance, covering electrical and refrigerant hazards.
Step-by-step guide for unit installation, including dimensions, location, wiring, and piping.
Verification steps after installation and initial operational testing.
Procedures for diagnosing and resolving malfunctions, including error codes.
Detailed diagrams and part numbers for indoor unit components.
Detailed diagrams and part numbers for outdoor unit components.
Conversion table for Celsius and Fahrenheit temperature units.
Guidelines on pipe lengths, refrigerant oil, and charging amounts.
Instructions for proper pipe expansion to prevent refrigerant leaks.
Tables correlating temperature sensor resistance values with specific temperatures.
